Follow carefully the thin-set and grout manufacturers
recommendations
Thin-set
Use a polymer-modified 2 components mortar
for better results.
Grout
Use a polymer-modified hydraulic tile
grout for better results.
Preparation
Subfloor
preparation
Thoroughly clean the concrete or the wooden surface:
remove all grease, grit and wood particles. Correct
any imperfection of the subfloor in accordance
with general surface preparation procedures.
Before membrane
installation
Aluminized side must be installed face up to reflect
temperature back into the room.
Can be cut with a retractable blade or scissors
(figure 2).
Make sure the membrane is installed at right
angle with the floor covering.
Allow an extra percentage to prevent losses caused
by the cutting of the membrane, angles and closets.
Prevent tranfer of sound
by vibrations
To assure maximum soundproofing performance,
it is very important to :
- Leave a space between the wall and the floor
covering (expansion space) to prevent the transfer
of vibrations (figure 1).
- Do not install moldings directly on the floor
covering, leave the space of a cardboard to
prevent the transfer of vibrations.
|
General Remarks : Installation Ceramic Flooring
Membrane
