Finitec Canada develops its products in its laboratory by using advanced technology and the best components. Our first priority is to offer superior quality wood floor finishes accessible to all.
Finitec finishes are the most resistant of the industry, far ahead solvent based finishes (Taber test proven). They will not yellow over time.
Finitec wood floor finishes can be applied over all kinds of oil or water based finishes for a successful restoration.
Finitec finishes are safe for your health and the environment. No need to leave the premises during the application. They are low VOC. (Volatile Organic Compounds are atmospheric pollutants that deteriorate air quality.)
Finitec wood floor finishes are easy to apply with an impressive drying time of 2 to 3 hours. Tools are easily cleaned with water. Once they are fully cured, they are easy to clean and maintain.
High-performance, safe, and eco-friendly water-based varnishes designed in Quebec.
At Finitec, we formulate our water-based varnishes in our own laboratory with a rigorous approach that combines cutting-edge technology, local expertise, and environmental respect. For over 25 years, we’ve been offering premium products that meet the needs of both homeowners and professionals.
Before applying a varnish, thorough floor preparation is essential to ensure optimal adhesion and a flawless finish.
A poorly prepared surface can compromise the varnish’s durability—even the best one. Follow these simple steps to set yourself up for success.
Before applying varnish, choose a stain that enhances the wood without compromising adhesion or durability.
Our stains and dyes are specially formulated to integrate perfectly with our water-based varnishes. They deliver rich, uniform, and long-lasting color while maintaining the performance of the finishing system.
A successful application starts with choosing the right accessories. Choose tools designed to maximize the performance of your Finitec varnishes.
For a uniform result, free of marks or imperfections, we recommend using accessories specifically made for applying water-based varnishes.
The main difference between FINITEC finishing is their resistance to abrasion. The most resistant of our finishes is the 9000, characterized by an adding of aluminum oxide.
The Finitec 9000 is available here
https://gofinitec.com/products-search?qs=9000
Yes. FINITEC water based finishes are odorless and nontoxic, so you don’t have to leave the house. In fact, FINITEC water based finishes dry so quickly that you can recoat your floors in only one day.
The solvents in the oil based finishes are a sort of carrier for the ingredients that constitute the finish (ex: urethane) and are released in the air during the application and throughout the drying time, leaving only the finish on the floor. In addition to being harmful to your health, they release an unpleasant odor. These solvents are harmful to the environment because they contain a large amount of VOC, which also forces you to leave your home for several days.
Furthermore, the water contained in the water based finishes also carries these ingredients, but as it is water, drying takes the form of evaporation. The water that evaporates during the application and throughout the drying period is safe for you and your family. You do not need to leave your home because water based finishes contain a low level of VOC. Moreover, water based finishes dry much faster than oil based finishes, which allows you to perform the job in only one day. Choosing a water based finish does not mean skimping on performance. In the case of FINITEC water based finishes, their performance exceeds oil based products.
All FINITEC finishing products meet the most severe environmental standards.
Yes. FINITEC finishing are ideal for recoating over water or oil based finishes
Yes. FINITEC finishing can be applied over all types of finishes, just slightly roughen the surface before using it. Refer to restoration products for more information on recoating floors without sanding.
Gray or black wood indicates that no finish remains at this place and that the wood is no longer protected against moisture or dirt. The surface must be completely sanded to remove all gray spots. Then you can apply the FINITEC finish of your choice.
The Taber test does this the hard way. An instrument called an abrasiometer inflicts a continual friction to the finish with an abrasive disk. The tested sample is weighed before and after the test in order to measure its loss of mass. Less mass lost means greater resistance.
The urethane resins used in the manufacture of FINITEC finishing are "aliphatic" type, which means the color will not spoil.
Yes. Follow the steps to prepare the surface to finish and use finishes for furniture and woodworks.
Yes. First, you have to neutralize the scouring solution with methyl hydrate or water (read the label of the scouring solution to choose the appropriate product). This product stops the action of the scouring solution and allows you to apply finish on your furniture. If you do not neutralize the scouring solution, it will continue to work and create some damage to the finish you will apply. Follow the instructions of your scouring solution manufacturer.
Yes. You can apply FINITEC finishing on surfaces suitable to receive hot meals or plates such as dinner tables. You can also use it on fireplace mantels.
No. FINITEC finishing are designed for indoor use only.
Yes. FINITEC finishing resist to moisture and are easy to maintain.
Yes. You can use FINITEC finishing over the majority of water or oil based stains. It is important to follow the drying time required by the stain manufacturer to ensure a proper adhesion of the finish.
Yes. Proceed the same way as a wood floor application; degreasing, roughening, finishing.
Yes. You can use a 10 mm (3/8”) roller to apply the FINITEC 3000, Synergy and 6000 ultra matte.
Yes. Finitec Synergy gives to the floor a rich color that enhances the aspect of wood. Its look reminds us of an oil based finish but offers all the water based finish advantages
The synergy finish is available here:
https://gofinitec.com/products-search?qs=synergy
The only difference is the format. For example, it is the same finish that is in the Finitec 6000 floors finish gallon that is in the furniture and floors 6000 1L.
During its maturation period (10 days), the Finitec 9000 floor finish is slightly slippery. However, beyond this period, it offers as much adhesion as our other finishes.
The Finitec 6000 finish is available here:
https://gofinitec.com/products-search?qs=6000
Yes, The Finitec finishes for furniture are the same than the floors ones. The format of the content only changes.
No. It is essential to sand before applying to let your finish grip.
It is strongly not recommended to not stretch your finish. It is important to lay down a good amount of finish on your floor for each coat to avoid all sort of application problems. You can get a 1L bottle to finish your work.
To make sure you are applying properly the Finitec finish, make sure you read the application guide
Yes. The previous coat has to be dry and clean
No. Too much coats will weaken the protection of your floor. It is recommended to apply 2 or 3 coats on an existing finish and 3 to 4 coats on bare wood.
Yes. Be sure to respect the recommended number of coats and drying time between coats.
Yes. You only have to drop the finish directly on the floor and go with wide roller movement on the room width without lifting the roller.
Each 115 ml bottle of Finitec dye is design for a Finitec finish gallon.
Please refer to the page “Maintenance tips”.
Yes, the containers are recyclable. Finitec Canada cares about the environment and strongly recommends you to recycle. Place containers in areas designated for that purpose.
They are available across Canada. Please consult our “List of retailers” to find your nearest retailer or call our customer service.
I used Finitec's surface preparation on my floor and was truly impressed with the result—this product is genuinely effective.
Wow, such great customer service that really listens. Excellent recommendation, I'm very satisfied with their products.
Great varnish, plus it's made in Quebec.
As a former finishing painter and someone who often works with wood finishes, I fully and proudly recommend this Quebec-made product. Attentive customer service. Thank you Finitec, see you next time.
Finitec 3000
Finitec 6000
Finitec 9000
Finitec Recoater
Finitec Synergy
Microban antimicrobial finish
Solidex
Finitec 3000
Finitec 6000
Finitec Recoater
Finitec Synergy
Microban antimicrobial finish
Surface Preparation
Water based stain
Woodfloor Finish Dye
Applicator refills
Finish applicator
Finitec Sanding Machine
Complete care system for wood and laminate floors
Laminate wood floral breeze floor cleaner 3.78L
Laminate wood mint floor cleaner 3.78L
Ultra concentrated cleaner for wood and laminate floor maintenance
Wood and laminate floor cleaner
Ceramic joints cleaner
Cleaner for ceramic floors
Complete care system for ceramic joints
Ultra concentrated cleaner for ceramic floors
Ceramic joints cleaning brush
Reversible replacement mop cover
Velcro replacement mop cover
Age-Tech
Tonic vinyl, ceramic, wood and laminates floors
Wood glue
DESIGN Paint
Flush mount
Top mount
MicroConcrete
MicroConcrete filling
MicroConcrete sealer
MicroConcrete Flexible Trowel
17 in Pad_thick
17 in Pad_thin
Ceramic abrasive belt
Ceramic edger disc
PSA adhesive roll
Zirconium abrasive belt
Zirconium edger disc
EX-1
EX-3
EX-6
EX-DUO+
EX-HYBRID
EX-TECH
EX-PRIME
Finish dye
Finish applicator
Finish applicator (T-bar)
Replacement finish applicator (T-bar)
Replacement pad finish applicator
Wood glue
Wood patch
EXTRA+
SURFACE Treatment
SURFACE Care
DESIGN paint / SURFACE Color
PROFLEX SURFACE sealer
SURFACE Sealer
TOP SURFACE finish
Industrial lacquer
