MicroConcrete F.A.Q.

Name: Finitec
Address: 660 rue du filtre, Victoriaville, QC, G6T 0T6, CA
Telephone: +1-418-889-9910
Price range: $$

Can I apply MicroConcrete on ceramic?

Yes, MicroConcrete can be applied on ceramic.
https://konsole.groupefinitec.com/storage/documentation/documents/351-application-guide.pdf
Can I apply MicroConcrete in the shower?

Yes, it's possible to use MicroConcrete in a shower. However, for shower floors, we recommend to use our wet look sealer.
https://konsole.groupefinitec.com/storage/documentation/documents/572-application-guide-shower.pdf
How to apply MicroConcrete on a variety of surfaces, such as ceramic and melamine?

Application on most surfaces, including ceramic and melamine:
https://konsole.groupefinitec.com/storage/documentation/documents/351-application-guide.pdf
How to apply MicroConcrete in a shower ?

Application on shower walls:
https://konsole.groupefinitec.com/storage/documentation/documents/572-application-guide-shower.pdf
What do I do if my mixture starts to dry while I'm applying it?

If the mixture starts to dry while you're applying it, use the drill and mixer to stir it again. If it stays dry, it's better to discard it and prepare a fresh mixture.
Can we mix the matte protective sealer with the wet effect protective sealer to achieve an intermediate finish

No, it is not recommended.
How to apply MicroConcrete on a floor ?

Application on different types of floors :
https://konsole.groupefinitec.com/storage/documentation/documents/591-application-guide-floor.pdf
Is it possible to replace the matte sealer used on a MicroBéton project with a wet-look sealer?

Yes, it's possible. However, to change the finish of a MicroConcrete project from a matte finish to a wet finish, it's necessary to sand the surface to remove the previously applied sealer layer, and then apply a new layer of MicroConcrete.
What is the coverage capacity of MicroConcrete ?

The coverage is approximately 35 sq.ft. per 3.5 kg bag and approximately 180 sq.ft. per 18 kg bucket.